Combination

I have done some experiments and it is fully possible to use the Piranha and the Titanium knives in combination. The best is to use the Piranha to hold and use the Titanium knife in the directions marked on the Stainless Steel blade. The greatest advantage with these two in combination is the bit function or the hex opening. Then you can custom build a bit set for a task you need.

One of the biggest problems with a multi-tool alone is when you need to work on two sides in one operation. With a combination or second tool/key then it is easier to do maintenance or different tasks without damaging a device.

The Piranha and Titanium with bits can be used how you want with one of them to hold and another to turn.

Skriv en kommentar: (Klikk her)

123hjemmeside.no
Antall tegn tilbake: 160
OK Sender...
Se alle kommentarer

| Svar

Nyeste kommentarer

19.04 | 08:35

Hi, thank you very much for message and info. Sounds like an interesting one you have there. Please send pictures TrondSAK@SAKhome.com will try to date it. BR

...
19.04 | 04:24

I have a victoria officer suisse.. But dont know what date.. Also the white tabs that are on the side of every knife almost like a toothpick..

...
05.04 | 18:41

It is maybe a compromise related to batches, models, thumb pressure depending on what side, ergonomics, riveting and the very solid design. BR

...
05.04 | 18:32

When in closed position the blade sits deep for protection and construction. Avoids opening by mistanke too. Thank you very much. BR

...
Du liker denne siden
Hei!
Prøv å lage din egen hjemmeside som jeg.
Det er enkelt, og du kan prøve det helt gratis.
ANNONSE